Stainless Steel Fire Door Pack Rtd C/W Intumesce 75mm Latch And 3pcs Ce13 100mm Hinges Other Satin Stainless Pack

The Stainless Steel Fire Door Pack represents the gold standard in fire-rated door hardware, delivering complete protection for FD30 and FD60 fire doors in commercial, residential, and public buildings. This all-inclusive kit features RTD intumescent protection, a precision 75mm latch, and three CE13 100mm hinges in durable satin stainless steel finish—everything needed for compliant, long-lasting installations.

Engineered for architects, builders, and contractors, this Stainless Steel Fire Door Pack ensures seamless integration with fire door assemblies while meeting stringent BS EN 1634 and Certifire standards. Bulk packs available for trade projects.

Why Choose This Stainless Steel Fire Door Pack?

Complete Fire Door Hardware Solution

• RTD Intumescent Protection: Seals gaps during fire exposure, expanding up to 30x original volume to prevent smoke and flame passage

• 75mm Fire-Rated Latch: Heavy-duty tubular latch with double-sprung mechanism for smooth, reliable operation on FD30/FD60 doors

• 3x CE13 100mm Hinges: Grade 13 stainless steel hinges with washered design for superior load-bearing and 120-minute fire integrity

• Satin Stainless Steel Finish: Corrosion-resistant 304-grade steel ensures longevity in harsh environments like coastal or high-humidity areas

Certified Performance and Compliance

Every component in this Stainless Steel Fire Door Pack undergoes rigorous testing:

• CE and UKCA marked for European safety standards

• Fire tested to BS EN 1634-1 for 30/60-minute integrity

• Intumescent materials comply with BS 476 Part 20/22

• Hinges meet ANSI/BHMA Grade 13 strength requirements

Key Features of the Stainless Steel Fire Door Pack

• Full Kit Contents: 1x RTD intumescent pack, 1x 75mm Certifire latch, 3x CE13 100mm satin hinges—ready for immediate installation

• 75mm Latch Specifications: Reversible action, 8mm spindle, bolt-through fixing, black back box for strike plate protection

• CE13 Hinges: 100x75mm size, double washered for smooth swing, 120kg door capacity per pair, 100,000+ cycle durability

• Intumesce RTD Seals: Pre-cut for standard door profiles, expands at 150°C to form airtight barrier

• Satin Stainless Construction: 1.2-2mm thick 304 stainless steel resists rust, fingerprints, and daily wear

Benefits for Installers and Specifiers:

• Reduces procurement time with one-stop fire door hardware solution

• Ensures full compliance documentation for building control inspections

• Minimizes call-back risks with proven fire-rated components

• Cost-effective bulk pricing for contractors and wholesalers

Technical Specifications: Stainless Steel Fire Door Pack Components

75mm Fire Door Latch Details

• Backset: 75mm standard for most internal fire doors

• Case: Satin stainless steel with Certifire label

• Forend: 25x57mm interchangeable polished/satin finishes

• Latchbolt: Brass, 14mm bolt throw with anti-friction strike

• Spindle: 8mm square compatible with lever handles

• Fixing: 6x countersunk screws + bolt-through option

CE13 100mm Hinges Technical Data

RTD Intumescent Protection Specs

• Coverage: Full lockset and hinge protection pads

• Expansion Ratio: 25:1 at 200°C

• Thickness: 1mm flexible graphite-based intumescent

• Adhesive: High-temperature pressure-sensitive backing

• Application: Self-adhesive, pre-cut for 75mm latch and 100mm hinges

Applications for Stainless Steel Fire Door Pack

Commercial Buildings:

• Office corridors and escape routes

• Stairwell access doors

• Server rooms and electrical cupboards

Residential Blocks:

• Common area fire doors

• Lift lobby separations

• Bin store enclosures

Public Sector:

• Schools and universities

• Hospitals and care homes

• Council housing flats

Industrial Sites:

• Warehouse partition doors

• Workshop fire separations

• Loading bay personnel doors

This Stainless Steel Fire Door Pack excels in high-traffic environments where durability meets regulatory compliance.

Installation Guide: Stainless Steel Fire Door Pack

Step 1: Hinge Installation

1. Position top hinge 150mm from door head, bottom 200mm from floor

2. Mark and drill pilot holes, secure with 5x30mm stainless screws

3. Install middle hinge equidistant between top/bottom

4. Test door swing alignment before final torquing

Step 2: Latch Preparation

1. Mortice 75mm latch case 65mm deep into door edge

2. Fit black plastic back box behind strike plate location

3. Secure with bolt-through screws through lever rose holes

4. Reverse latch direction if needed (twist 180°)

Step 3: Intumescent Application

1. Clean surfaces, peel backing from RTD pads

2. Apply lock protection pad over latch case edges

3. Position hinge intumescent sleeves around each knuckle

4. Press firmly for 30 seconds—cure 24hrs before painting

Pro Tip: Always fit intumescent before painting doors to ensure expansion performance.

Maintenance and Longevity

Stainless Steel Fire Door Pack components require minimal upkeep:

• Annual Inspection: Check latch operation, hinge pin tightness, intumescent adhesion

• Lubrication: Graphite powder on latchbolt every 6 months

• Cleaning: Mild detergent and microfibre cloth—avoid abrasives

• Service Life: 25+ years in normal conditions, 15+ years coastal exposure

Compliance Documentation Included

Each Stainless Steel Fire Door Pack ships with:

• Certifire certificate of conformity

• BS EN 1634 fire test reports

• CE/UKCA declarations

• Installation and maintenance instructions

• Load capacity statements

Essential for Building Regulations Part B submissions.

Bulk Trade Pricing and Availability

Contractor Benefits:

• 10+ packs: 5% discount

• 50+ packs: 12% discount + free delivery

• 100+ packs: Custom pallet rates + priority dispatch

Fast Delivery: UK mainland next-day on stocked satin stainless finish.

Customer Reviews: Stainless Steel Fire Door Pack

“Perfect complete kit for our office refit—saved hours sourcing separate components. Fire officer approved on first inspection!” – Commercial Builder, Manchester

“Satin finish looks premium, hinges swing beautifully even on heavy oak doors. Bulk order arrived palletized within 48hrs.” – Joinery Contractor, Birmingham

“Intumescent protection was easy to fit, latch operates silently. Will standardize this pack across all our sites.” – Facilities Manager, Leeds

Frequently Asked Questions

Q: Is this Stainless Steel Fire Door Pack suitable for FD60 doors?
A: Yes, fully tested for 60-minute fire integrity with compatible door assemblies.

Q: What door thickness does the 75mm latch fit?
A: Designed for 44-54mm thick fire doors; adjustable strike plate included.

Q: Are the CE13 hinges removable?
A: Yes, loose pins allow easy door removal for maintenance.

Q: Can I paint over the intumescent pads?
A: Apply thin coats only—maximum 0.5mm total paint thickness permitted.

Q: What’s the warranty on this Stainless Steel Fire Door Pack?
A: 10-year mechanical warranty, 5-year intumescent performance guarantee.

Compare Stainless Steel Fire Door Pack vs Standard Hardware

Upgrade to the Stainless Steel Fire Door Pack for assured performance and peace of mind.

Order Your Stainless Steel Fire Door Pack Today

Available in satin stainless steel with optional brassed or polished finishes. Perfect for new builds, refurbishments, and maintenance contracts. Contact our trade desk for volume pricing or custom pack configurations.

Ready to protect your premises? Add to cart now and ensure fire safety compliance with this complete Stainless Steel Fire Door Pack.